A & E Firms > Network Attached Storage Product Specifications > 5300 Storage System Specifications
5300 Storage System Specifications
- The network attached storage array shall provide connectivity via a single 10/100/1000 Ethernet interface.
- The network attached storage array shall hardware based RAID 0 and RAID 5 configuration options.
- The network attached storage array shall utilize a Linux kernel as the base operating system.
- The network attached storage array shall utilize 16 Seagate ES II series hard drives.
- The network attached storage array shall provide 2 logical mounts consisting of 8 drives each.
- The network attached storage array shall provide up to 16 Terabytes of storage.
- The network attached storage array shall utilize hot-swappable drive sleds.
- The network attached storage array shall provide 3 power supplies configured in a 2+1 configuration for redundancy.
- The network attached storage array shall provide independent configuration of each mount in the system.
- The network attached storage array shall include a rack mount kit consisting of rails and associated hardware.
- The network attached storage array shall require a total of 3 rack units of space.
- The network attached storage array shall be fully managed via the Steelbox Network Media Appliance.
- The network attached storage array logical mounts shall be automatically load balanced by the Steelbox Network Media Appliance.
- The network attached storage array shall offer performance profiles configured by the Steelbox Network Media Appliance.
- Available profiles. These numbers apply per mount.
- 0: Prefer Writes over Reads and Rate over Files
- RAID-0: Write:300 Mbps Read: 75 Mbps Write Files: 60 Read Files: 20
- RAID-5: Write:135 Mbps Read: 50 Mbps Write Files: 30 Read Files: 12
- 1: Prefer Writes over Reads and Files over Rate
- RAID-0: Write: 90 Mbps Read: 50 Mbps Write Files:128 Read Files: 25
- RAID-5: Write: 90 Mbps Read: 50 Mbps Write Files: 90 Read Files: 20
- 2: Read/Write Balance and Rate over Files
- RAID-0: Write:150 Mbps Read:150 Mbps Write Files: 15 Read Files: 15
- RAID-5: Write:100 Mbps Read:100 Mbps Write Files: 15 Read Files: 15
- 3: Read/Write Balance and Files over Rate
- RAID-0: Write: 75 Mbps Read: 75 Mbps Write Files: 40 Read Files: 40
- RAID-5: Write: 75 Mbps Read: 75 Mbps Write Files: 25 Read Files: 25