A & E Firms > Steelbox NMA Product Specifications > 2000 Steelbox Specifications
2000 Steelbox Specifications
- The Network Video Recorder shall be a rack mount, 2U chassis with a depth of 17 inches.
- The Network Video Recorder shall provide a minimum of 6 10/100/1000 Ethernet ports for direct connectivity to Network Attached Storage devices and network infrastructures.
- The Network Video Recorder shall provide a single 115V-240V AC power supply.
- The Network Video Recorder shall use solid-state media as the primary storage device for operating system and configuration files.
- The Network Video Recorder shall not require a keyboard or external monitor for normal operation.
- The Network Video Recorder shall provide for 330 mbps of input bandwidth for camera devices.
- The Network Video Recorder shall support up to 100 simultaneous camera streams per 2U unit based on 100 MPEG-4 streams at 3 mbps per stream.
- The Network Video Recorder shall support 330 mbps of output bandwidth to client workstations or viewing terminals.
- The Network Video Recorder shall provide simultaneous recording of video in MPEG-2, MJPEG, and MPEG4 video formats.
- The Network Video Recorder shall be capable of reducing the recorded video frame rate of MJPEG, and MPEG4 video formats.
- The Network Video Recorder shall be capable of automated post storage conservation through programmed frame rate reduction of MPEG-2, MJPEG, and MPEG-4 video formats.
- The Network Video Recorder shall provide a GUI and Command Line Interface for configuration purposes.
- The Network Video Recorder shall be capable of receiving and routing of Unicast and Multicast video streams simultaneously.
- The Network Video Recorder shall be capable of converting video streams from and to Unicast and Multicast.
- The Network Video Recorder shall provide simultaneous recording and playback of up to 100 video streams.
- The Network Video Recorder shall maintain the system index for video retrieval from the Network Attached Storage arrays.
- The Network Video Recorder shall provide full management of Network Attached Storage arrays without additional software including the following features:
- Automated provisioning of newly attached Network Attached Storage arrays
- Load balancing storage across multiple arrays based on file system performance and total throughput to each storage mount
- Compensation for storage mount failure
- Automated storage shutdown based on thermal thresholds.
- Alarm conditions including:
- Drive space
- Disk temperature
- RAID health
- Recording status
- Network integrity
- RAID 0 and RAID 5 disk array creation
- Disk array format
- The system shall utilize the Real-Time Internet Kernel (RTIK) operating system.
- The Network Video Recorder shall auto-reconnect to cameras and/or the network after a camera or network outage.